CN-11-250

Purpose of cyclones CN-11-250

Cyclones CN-11 are specially designed to clean gas from dust with solid particles of different nature, and inherently are universal equipment, as they can cope with dust containing particles of sand, metal, wood. This technique is highly efficient and practically not subject to abrasive damage. Due to the fact that the inlet of the cyclones CN-11-250 is located at an angle of 11°, they have a high speed, which in turn provides better processing and purification of air from small particles. Cyclones CN-11-250 made in standard assembly cannot be used in explosive environments. Also, these cyclones are not recommended for purification of gas-air mixtures with a high content of sticky substances or substances having a liquid-droplet phase. Permissible dust content of the air that can be cleaned with the help of CN-11-250 should not exceed 1000 g/m3.

Design of cyclones CN-11-250

These installations can be performed both in single and in group version with standard equipment of 2, 4 pcs. together. They are made in two versions - right-hand and left-hand. They have a standard set of elements: a cylinder, an inlet pipe, a screw cap, a cone, an exhaust pipe, a snail (some configurations are made without a snail). In single cyclones, the hopper has the shape of a cylinder. The purified gas chamber in the single version can be only a snail. For the manufacture of CN-11-250 ordinary carbon or more wear-resistant low-alloy steel is used. The determination of the material for manufacturing is mainly influenced by the future environment and operating conditions in which the cyclone CN-11-250 will be used. Carbon steel is used if the minimum temperature of the cyclone working environment does not fall below -40 °С, otherwise, low-alloy steel is used. Cyclones CN-11 are also produced in explosion-proof design. These designs provide special valves and compact dimensions of the hopper, due to which the possibility of accumulation of explosive dust is significantly reduced.

Installation of cyclones CN-11-250

It is recommended to install on the suction side of the fan. Due to this, the static pressure will be below atmospheric pressure. Thus, a system is built in which the impact of the abrasive on the fan is minimal. The gas comes out swirled and then is leveled by the air swirler, which has a very positive effect on system performance (capacity, pressure, degree of purification). When designing a system with a fan after the cyclone TsN-11, it is possible to complete VC 14-46 in addition to VC 5-45, VC 6-45, VC 6-46, VC 7-40. When placing the cyclone in series after the fan, only dust fans should be designed. An air spinner is not required.

Main characteristics of cyclones CN-11-250

Model	Productivity, m3/h	Size, mm			Weight, kg
		D	H	aхb
CN-11-250	420-620	250	1150	120x65	24

The price for the cyclone CN-11-250 is given without the cost of the hopper, pedestal and dust shutter (the cost is calculated separately). If you want to buy a universal cyclone dust collector single version without a snail CN-11-250, you can contact our managers in the most convenient way for you. It is also possible to place an online order directly on the site. We have an individual system of discounts for regular customers or when placing a large order. The company regularly announces promotional prices for popular items for goods that are available in stock. If you need advice on products or a complete price list, our managers will be happy to help you. The price for a universal cyclone dust collector single version without a cochlea CN-11-250 in our store is almost always lower than average. We do everything to ensure that our customers receive the highest quality products and service for a reasonable price. We can offer you a huge range of products, most of which are available in stock right now. If it is necessary to individually order equipment from the manufacturer, we guarantee you a minimum waiting time and delivery.