CP-2-1600

Cyclone-dustcollector

General information about the cyclone CP-2-1600

The sphere in which the cyclone is used is ventilation. Universal cyclone CP-2 is used for purification of large volumes of air (from 17 thousand m3) in order to separate dust from it. This equipment is designed for air filtration after drying systems or when burning solid fuel in a pulverized state. However, for the transportation of dust with a fibrous structure or sticky dust, it is not recommended to use CP-2, as the cyclone is not designed for such operations and there is a high probability of its rapid failure. If you need a device capable of transporting dust with the above characteristics, it is best to use RISI cyclones. The main feature of CP-2 is that, despite their direct purpose, this technique can be successfully used in absolutely all industrial sectors. Most often, these cyclones are included in projects involving large volumes of air purification. When made of special materials, this cyclone can be used in explosive environments. The maximum temperature of the transported gas should not exceed 420°C. According to DSTU 15150-69 Cyclones CP-2 can be freely used in three main climatic groups. In tropical climates, in conditions with moderate average temperatures and in the most extreme conditions with low temperatures. These cyclones are manufactured exclusively in single version with an internal diameter from 1400 to 4250 mm.

When choosing a cyclone, you should pay attention to the following:

• The source of the saw;
• Composition and type of dust;
• The volume of air purification;
• The degree of dust saturation.

When calculating the aspiration system, you should pay attention to the following elements:

• The length and width of the umbrella at the air inlet;
• The speed of gas movement in the duct;
• Total length of the system;
• Lifting height;
• Brand of cyclone and fan (pressure and capacity).

Safety valves of the cyclone CP-2-1600

Cyclones CP-2 are equipped with special safety valves, which are installed on the cyclone cover and on the inlet pipe. The valves are manufactured in accordance with all explosion safety rules required for working with fuel in a dusty state. The diameter and number of such valves depends entirely on the diameter of the cyclone itself. According to the general safety rules, it is necessary to equip platforms and ladders that would provide quick and easy access to the valves. However, if the cyclone is not planned to be used for handling explosive media, it can be supplied without safety valves, according to the customer's requirement. The valves are delivered in dismantled condition. All installation is carried out by the customer.

Design of cyclone CP-2-1600

Cyclone CP-2 has a cylindrical (1/3) and conical part (2/3). The conical cone provides intensive gas cleaning. The standard material of the cyclone is carbon steel, cyclones from other materials are assembled under the order. As mentioned earlier, safety valves are used in CP-2 at the inlet and outlet nozzles. The size of the safety valves depends on the size of the cyclone. The unit is equipped with a pedestal with a ladder for easy access to the hatches. The standard version of the cyclone is carbon steel. Dust is collected in a small hopper to prevent its ignition.

Cyclone hopper CP-2-1600

The hopper and cyclone are hermetically welded and connected to improve the cleaning performance. The degree of cleaning depends on the type of dust, fan, cyclone brand, air duct thickness, etc. Cyclones CP-2 can perform tasks similar to the cyclone CN-15 with a slight difference in performance. The limit pressure is 6000 Pa. The fan can be designed before or after the cyclone. Accordingly, it can pump or thin the air in the system. When selecting a fan, the system resistance and fan performance are calculated.

Main characteristics of the cyclone CP-2-1600

If you want to buy a cyclone dust collector CP-2-1600, you can contact our managers in the most convenient way for you. It is also possible to place an online order directly on the site. We have an individual system of discounts for regular customers or when placing a large order. The company regularly announces promotional prices for popular items for goods that are available in stock. If you need advice on products or a complete price list, our managers will be happy to help you. The price for cyclone dust collector CP-2-1600 in our store is almost always lower than the average. We do everything to ensure that our customers receive the highest quality products and service for a reasonable price. We can offer you a huge range of products, most of which are available in stock right now. If it is necessary to order equipment individually from the manufacturer, we guarantee you a minimum waiting time and delivery.