UCM-38-350

Cyclone dustcollector

General information about the cyclone UCM-38-350

The scope of application of such a unit as a cyclone is ventilation. The UCM-38 cyclones are designed to capture fine dusts in pneumatic conveying systems and aspiration units. They are widely used and relevant in the hulling and grinding departments of cereal and flour mills. Cyclones can be equipped with a snail on the exhaust pipe or an umbrella if necessary: it all depends on the location of the fan and the need for protection against precipitation, which, if it enters the system, adversely affects its operation. During the operation of the cyclone under pressure, the unit is equipped with an umbrella; if the dust collector operates under discharge, a snail is installed.

Design of the cyclone UCM-38-350

Cyclones of the UCM-38 type are manufactured from 250 to 850 mm in diameter. The efficiency of their operation for fine flour dusts ranges from 99 to 99.5% for group cyclones. The percentage of flour dust purification for single cyclone dust collectors is from 98 to 99%, which is a very high indicator, given that the device operates without additional filters and is not combined in this case into a battery. For ease of operation and simplified installation, cyclones of the UCM-38 type are manufactured in both right and left versions. The modernized model of the UCM-38 cyclone differs from the UC-38 model by the presence of a spiral-screw swirler, which allows to increase the productivity of the device and significantly reduce the aerodynamic drag coefficient.

Cyclone hopper UCM-38-350

The air purification cyclone UCM-38 is equipped with a special storage hopper, which serves for the accumulation and temporary storage of dust. For the well-established and high-performance operation of the cleaning equipment, it is very important to monitor the amount of dust masses in the hopper: it should not exceed the level that serves as a kind of indicator of the permissible norm. A special plane is located at a distance of 0.5 diameters from the cyclone hopper lid, it is necessary to prevent the dust level from reaching this plane. Since the operation of the dust collector is not fully automated, there must be a responsible employee who will monitor the filling of the cyclone hopper and control the regularity of cleaning. If this important point is not taken into account, the hopper will clog, the efficiency of the entire system will decrease, the overall service life will be reduced, and the device will fail. To prevent this from happening, it is enough to follow the simple rules mentioned above, and you will thus provide your industrial enterprise with high-quality modern equipment for many years. In order to make an initial calculation of the cyclone, pay attention to the main characteristics of the unit, which are shown in the table.

Main characteristics of the cyclone UCM-38-350

If you want to buy a UCM-38-350 cyclone dust collector, you can contact our managers in the most convenient way for you. It is also possible to place an online order directly on the website. We have an individual system of discounts for regular customers or when placing a large order. The company regularly announces promotional prices for popular items that are in stock. If you need advice on products or a complete price list, our managers will be happy to help you. The price of cyclone dust collector UCM-38-350 in our store is almost always lower than average. We do our best to ensure that our customers receive the highest quality products and service at a reasonable price. We can offer you a huge range of products, most of which are in stock right now. If you need to order equipment individually from the manufacturer, we guarantee you a minimum waiting and delivery time.