PVM 20SA

ID 35775  In stock
Choose another ›
ID 35775  In stock
Produc­tivity, m3 / h 20000
Height mm 4575
Length mm 2360
Width, mm 2290
Electric drive power, kW 30
Weight, kg 2400

PVM 20SA

PVM 20SA

Cyclone dust collector

Purpose of PVM 20SA cyclones

Wet ventilation dust collector of increased explosion-proof PVM 20SA is designed for purification of air removed by exhaust ventilation systems from dust of medium and fine dispersion, including explosive, fibrous, poorly wettable dusts heavier than water. Upgraded design of wet dust collectors PVM allows to use them in any industrial fields.

If the dust concentration exceeds 10g/m³ it is recommended to use them as a second stage by pre-cleaning the air in simple dry dust collectors (cyclones etc.) in order to reduce water consumption and the amount of sludge.

Allowed recirculation of exhaust air, which is removed by systems of local suction of explosive dust of plant or animal origin, placed in the premises with the production category B and D, after its cleaning in PVM, except for rooms, the air which emit hazardous substances 1, 2, and 3 hazard class according to GOST 12.1.005 - 88 and rooms whose air contains pathogenic bacteria, viruses and fungi, or has a strongly pronounced odor nasty.

Principle of operation of PVM 20SA cyclones

The air cleaning process in the PVM 20SA cyclones is as follows: the dusty air enters the casing through the inlet pipe, rushing at high speed through the gap between the water surface and the lower edge of the baffle, capturing water with itself. The water entrained by the air is deflected by the droplet eliminator and drains to the outermost compartments. The purified air passes through the droplet eliminators and is discharged to the outside by the fan.

In the PVMSA type dust collector, sludge, which either dissolves in water or settles at the bottom of the dust collector, is removed through a special gate valve, which is conveniently located at the bottom of the unit. To remove the sludge as effectively as possible, a special flushing device, which is located near the gate valve, is often used.

Thus, the air purification efficiency when using PVM dust collectors reaches 95-99%, depending on the nature and size of the cleaned particles.

Main characteristics of PVM 20SA cyclones

Model

Performance, m3

Size, mm

Weight, kg

A

B

H

PVM 20SA

20000

2360

2290

4575

2400

The price of the cyclone dust collector PVM 20SA is given without the cost of the pedestal and dust gate (the cost is calculated separately).

If you want to buy the cyclone dust collector PVM 20SA at the lowest price, you can contact our managers in the most convenient way for you. It is also possible to place an online order directly on the site. We have an individual system of discounts for regular customers or when placing a large order. The company regularly announces special prices on popular products that are in stock. If you need advice on purchasing or selecting products, or you are interested in the full price list, our managers will be happy to help you. Price of cyclone dust collector PVM 20SA in our store is almost always below average. We do our best to provide our customers with the highest quality products and service for a reasonable price.

Dimensions

DIMENSIONS OF PVC 20SA

Overall dimensions are approximate. Photos are for reference only.
Due to the constant modernization, for accurate data, please contact the managers.

ciklon-pvm_gab

Model Overall dimensions, mm
A B H
PVM 20SA 2360 2290 4575

Reviews

There are no reviews yet.

Be the first to review “PVM 20SA”

Your email address will not be published. Required fields are marked *