SK-CN-34-2400

ID 23790  In stock
Choose another ›
ID 23790  In stock
Produc­tivity, m3 / h 40700
Height mm 6788
Diameter, mm 2400
Max. transported air temperature, °C 400
Optimal speed inside the installation, m/s: 1,4-1,7
Working pressure (max.), Pa: 1000
Mass concentration of dust, g/m3: 1000
Weight, kg 1206

SK-CN-34-2400

Cyclone dust collector

General information about cyclone SK-CN-34-2400 

The sphere in which such equipment as a cyclone is usually used is ventilation. Cyclones SK-CN-34 are used in Ukraine and CIS countries for air cleaning from impurities in the form of fine dust, soot and other solid particles. Very effective in work with soot, these devices can be often met among equipment of boiler rooms. These cyclones are manufactured in different sizes and assemblies, due to which they are very convenient to use at industrial and boiler facilities of different nature. Cyclone for air purification SK-CN-34 is effective in working with fine dust, including volatile dust, which is formed in smoke. When installing on large boilers for smoke purification, it is desirable to put a battery unit. This will give a greater degree of air purification. After the cyclone it is possible to install charcoal filters, which will be able to filter out everything (up to the smell). In the case of robots in conditions with high abrasive level Cyclones SK-CN-34 are made of thick metal (3 mm). They can often be found as a universal means for cleaning from a large number of different impurities at the same time. Cleaning in the cyclone is due to centrifugal force. It appears after the air is swirling in a spiral. The centrifugal force starts to act after the flow is swirling, which directs the solid particles from the center to the cyclone walls, where they are crumbled down.

Advantages of Cyclone SK-CN-34-2400 

  • High percentage of smoke purification from soot and other types of particulate matter, the degree of air purification of 90-98%;
  • The possibility of universal use;
  • Affordable price;
  • Ease of use.

Material movement in cyclone SK-CN-34-2400 

  • Soot or any kind of dust enters through the side opening, where it begins to clean;
  • The solid particles reach the walls of the cyclone due to centrifugal force, and fall down the hopper;
  • Cyclone SK-CN-34-2400   ejects clean air through the upper hole;
  • Dust accumulates in the hopper.

Cyclone SK-CN-34-2400   can operate, depending on the brand, in the range from 1 to 120 thous. m

Installation of cyclone SK-CN-34-2400 

This technique works in tandem with a smoke pump. Smoke pump distributes the smoke through the unit, and the latter, in its turn, cleans the smoke from soot. The smoke exhauster (D, DN, VDN) and dust fans (VCP 5-45, VCP 6-45, VCP 6-46, VCP 7-40) can be paired with this cyclone. There are many secrets of good cyclone operation, please call and we will reveal them to you. When designing you need to coordinate: the diameter of the exhaust pipe, brand of the smokebox, the length of the system, brand of the smokebox and cyclone.

Manufacturing cyclone SK-CN-34-2400 

Cyclone SK-CN-34 is made of black sheet metal (other material on request). Flanges are welded to the holes, which make installation very easy. We make adapters of any size (galvanized steel) to simplify the installation of connections of different diameters. We produce right- and left-handed cyclones.

Cyclone hopper SK-CN-34-2400 

Cyclone is completed with a hopper. Type, thickness of metal, dimensions, shape, price depends on the specific conditions of the robot. Its size determines how often the hopper will be cleaned from soot (a day, ten days, etc.). Before starting the cyclone in operation, check all the parameters with a specialist.

The initial cyclone calculation can be performed using the data from the table below.

Main characteristics of cyclone SK-CN-34-2400 

Model

Productivity, m3/h

Size, mm

Weight, kg

D

H

a x b

SK-CN-34-2400 40700 2400 6788 1236 x 514 1206

If you want to buy cyclone dust collector SK-CN-34-2400   at minimum price, you can contact our managers in the most convenient way for you. It is also possible to place an online order directly on the site. We have an individual system of discounts for regular customers or when placing a large order. The company regularly announces special prices on popular products that are in stock. If you need advice on purchasing or selecting products, or you are interested in the full price list, our managers will be happy to help you. Price of cyclone dust collector SK-CN-34-2400   in our store is almost always below average. We do our best to provide our customers with the highest quality goods and service at a reasonable price.

Dimensions

DIMENSIONS SK-CN-34-2400

Overall dimensions are approximate. Photos are for reference only.
Due to the constant modernization, for accurate data, please contact the managers.

sdk-cn-33-gabarits-ukr

Model Overall dimensions, mm
D H aхb
SK-CN-34-2400 2400 6788 1236х514

Reviews

There are no reviews yet.

Be the first to review “SK-CN-34-2400”

Your email address will not be published. Required fields are marked *