PVM 40SA

ID 35776  In stock
Choose another ›
ID 35776  In stock
Produc­tivity, m3 / h 40000
Height mm 5010
Length mm 4385
Width, mm 2314
Electric drive power, kW 45
Weight, kg 4720

PVM 40SA

PVM 40SA

Cyclone dust collector

Purpose of PVM 40SA cyclones

Wet ventilation dust collector of increased explosion-proof PVM 40SA is designed for purification of air removed by exhaust ventilation systems from dust of medium and fine dispersion, including explosive, fibrous, poorly wettable dusts heavier than water. Upgraded design of wet dust collectors PVM allows to use them in any industrial fields.

If the dust concentration exceeds 10g/m³ it is recommended to use them as a second stage by pre-cleaning the air in simple dry dust collectors (cyclones etc.) in order to reduce water consumption and the amount of sludge.

Allowed recirculation of exhaust air, which is removed by systems of local suction of explosive dust of plant or animal origin, placed in the premises with the production category B and D, after its cleaning in PVM, except for rooms, the air which emit hazardous substances 1, 2, and 3 hazard class according to GOST 12.1.005 - 88 and rooms whose air contains pathogenic bacteria, viruses and fungi, or has a strongly pronounced odor nasty.

Principle of operation of PVM 40SA cyclones

The air cleaning process in the PVM 40SA cyclones is as follows: the dusty air enters the casing through the inlet pipe, rushing at high speed through the gap between the water surface and the lower edge of the baffle, capturing water with itself. The water entrained by the air is deflected by the droplet eliminator and drains to the outermost compartments. The purified air passes through the droplet eliminators and is discharged to the outside by the fan.

In the PVMSA type dust collector, sludge, which either dissolves in water or settles at the bottom of the dust collector, is removed through a special gate valve, which is conveniently located at the bottom of the unit. To remove the sludge as effectively as possible, a special flushing device, which is located near the gate valve, is often used.

Thus, the air purification efficiency when using PVM dust collectors reaches 95-99%, depending on the nature and size of the cleaned particles.

Main characteristics of PVM 40SA cyclones

Model

Performance, m3

Size, mm

Weight, kg

PVM 40SA

40000

4385

2314

5010

4720

The price of the cyclone dust collector PVM 40SA is given without the cost of the pedestal and dust gate (the cost is calculated separately).

If you want to buy the cyclone dust collector PVM 40SA at the lowest price, you can contact our managers in the most convenient way for you. It is also possible to place an online order directly on the site. We have an individual system of discounts for regular customers or when placing a large order. The company regularly announces special prices on popular products that are in stock. If you need advice on purchasing or selecting products, or you are interested in the full price list, our managers will be happy to help you. Price of cyclone dust collector PVM 40SA in our store is almost always below average. We do our best to provide our customers with the highest quality products and service for a reasonable price.

Dimensions

DIMENSIONS OF PVM 40SA

Overall dimensions are approximate. Photos are for reference only.
Due to the constant modernization, for accurate data, please contact the managers.

ciklon-pvm_gab

Model Overall dimensions, mm
A B H
PVM 40SA 4385 2314 5010

Reviews

There are no reviews yet.

Be the first to review “PVM 40SA”

Your email address will not be published. Required fields are marked *