KVZ-UkrBudMash service
CNC sheet metal bending
We bend sheet-metal parts to drawings, controlling angle, flange size and bend sequence.
01
What the work includes
For quoting, we review grade and thickness, inside radii, grain direction and tool access. A correct flat pattern and operation sequence prevent collisions and accumulated error.
Typical work includes housings, guards, brackets and ventilation components. Bending can be combined with laser cutting, welding and coating.
- ✓Single and multi-stage bends
- ✓Housings, guards and brackets
- ✓Complete manufacture with cutting
02
Indicative sheet-metal bending prices
Price in UAH, excluding VAT, per bend by thickness and length
| Thickness, mm | 0–1000 мм | 1001–2000 мм | 2001–3000 мм |
|---|---|---|---|
| 0,5–2,0 | 12 | 18 | 22 |
| 2,5–3,0 | 14 | 24 | 28 |
| 4,0 | 24 | 28 | 32 |
| 5,0 | 24 | — | — |
| 6,0 | 28 | — | — |
| 8,0 | 32 | — | — |
Coefficient by bend quantity
| Number of bends | 1–10 | 11–50 | 51+ |
|---|---|---|---|
| Coefficient | 2 | 1,5 | 1 |
Prices are indicative. KVZ-UkrBudMash confirms the final amount after reviewing drawings, material, quantity and work complexity.
03
How an order works
Technical questions are resolved before release so production follows agreed data.
- 01Request and files
Send a drawing, model or dimensioned photo and state the quantity.
- 02Engineering review
Material, tolerances, datums and the operation sequence are reviewed.
- 03Quotation
Scope, material, lead time and price are agreed before release.
- 04Production and inspection
Parts are made to the agreed documentation and critical dimensions are inspected.
04
What to send for a quotation
Accurate input data speeds up the engineering review and preparation of a useful response.
Go to the form- →PDF drawing and, when available, DXF or STEP
- →Material grade, thickness or blank type
- →Customer-supplied material or ours
- →Part quantity and required timing
- →Critical tolerances, coating and special requirements
05
Related capabilities
06
Questions about ordering
What is needed for a quote?+
PDF/DXF, material grade and thickness, quantity and coating requirements.
Can you prepare the flat pattern?+
Yes, after checking the 3D model and agreeing critical dimensions.
Can you make a trial part?+
A prototype can be agreed for critical or repeat-production parts.
Leave a request
Leave your phone number and email. Our manager will confirm the configuration, price and lead time.